Screw air compressor can not be started mainly has the following points:

 

1、 Check whether the fuse is burnt out,

 

2、 The relay that protects the machine is ineffective.

 

3、 The start button is not in good contact, which is not a common problem, because in the present screw air compressor, unless it is really a cheap and low-cost machine, such a problem will not appear in general, even if it appears, it will be solved very well.

 

4、 The supply voltage of the screw air compressor is too low, which causes the current of the air compressor to be too large, so it cannot be started.

 

5、 There is a problem with the motor of the machine, which is more complicated. The probability of such problems is relatively low for air compressor manufacturers with strong technical strength.

 

Don't be anxious to see if the above reasons cause the problems.